Matrox Maevex 6100 and 5100 Series
To take advantage of the latest PowerStream/PowerStream Plus software features, you need the latest Maevex firmware. Both the PowerStream/PowerStream Plus software and Maevex firmware need to be updated. These are two separate required installations.
Please note: For new deployments, IP addresses must be assigned to Maevex units. The Maevex PowerStream/PowerStream Plus application must be installed on a system within the Maevex subnet and the network must initially include a DHCP service in order to properly assign IP addresses to the units and then perform a Maevex firmware update.
Maevex PowerStream Plus Software and Firmware for 6100 and 5100 Series
Your Matrox Maevex product may ship with an older firmware version.
Before using your Maevex product, you must update the firmware version installed on your devices to use the version of your deployed release.
All Maevex devices on a Maevex network must use the same version of the firmware package. Your firmware package version must also match the package version of your PowerStream Plus software.
Depending on the model of your new Maevex device, you may need to move up to a minimum level of Maevex PowerStream Plus Software and Firmware package - please see below for details. Note that the firmware revision that is installed onto your Maevex 5100 devices will differ from the firmware revision installed onto your Maevex 6100 devices and this is supported as long as they are from the same firmware installation package.
Contact Matrox Technical Support for more details.
Minimum required level of Maevex PowerStream Plus Software and Firmware:
- Maevex 6122/6152 Encoders & Decoders (new P/Ns with added "2" suffix) = Maevex PowerStream Plus Software and Firmware v. 3.02.00.383
- Maevex 6152 Decoder = Maevex PowerStream Plus Software and Firmware v. 3.00.01.005
- Maevex 6152 and 6122 Encoders = Maevex PowerStream Plus Software and Firmware v. 3.01.00.229
Date Released |
PowerStream Plus Software |
Firmware package & update utility |
Release Notes |
|---|---|---|---|
| 2023-04-11 |
PowerStream Plus Setup 3.02.00.383Do not forget to also download and install the new firmware: Firmware Package Version 3.02.00.383 Windows 11 Windows 10 (64-bit) Windows Server 2022 Windows Server 2019 |
Firmware Package Version 3.02.00.383Do not forget ot also download and install the new software: PowerStream Plus Setup 3.02.00.383 Please follow the firmware update instructions Note: This firmware package contains the 1.05.09.001 firmware version for the Maevex 5100 series. |
New P/Ns with added "2" suffix will be supported on Maevex SW/FW versions 3.02 and up, and will be interoperable with devices built under previous part numbers if they are also programmed with Maevex SW/FW versions 3.02 and up. What to expect from your hardware and software - please see release notes. Matrox does not support the mix and match of Maevex units of the same series with different firmware versions. All Maevex devices on a Maevex network must use the same version of the firmware package. Your firmware package version must also match the package version of your PowerStream Plus software. Contact Matrox Technical Support for more details. |
| 2021-10-26 |
PowerStream Plus Setup 3.01.00.229Do not forget to also download and install the new firmware: Firmware Package Version 3.01.00.229 Windows 10 (64-bit) Windows 7 (64-bit or 32-bit) Windows Server 2008R2 (64-bit) Windows Server 2016 (64-bit) Windows Server 2019 (64-bit) |
Firmware Package Version 3.01.00.229Do not forget ot also download and install the new software: PowerStream Plus Setup 3.01.00.229 Please follow the firmware update instructions Note: This firmware package contains the 1.05.09.001 firmware version for the Maevex 5100 series. |
Added Support for Matrox Maevex 6152 and 6122 Encoders. What to expect from your hardware and software - please see release notes. Matrox does not support the mix and match of Maevex units of the same series with different firmware versions. All Maevex devices on a Maevex network must use the same version of the firmware package. Your firmware package version must also match the package version of your PowerStream Plus software. Contact Matrox Technical Support for more details. |
| 2021-01-08 |
PowerStream Plus Setup 3.00.01.005Do not forget to also download and install the new firmware: Firmware Package Version 3.00.01.005 Windows 10 (64-bit) Windows 7 (64-bit or 32-bit) Windows Server 2008R2 (64-bit) Windows Server 2016 (64-bit) Windows Server 2019 (64-bit) |
Firmware Package Version 3.00.01.005Do not forget ot also download and install the new software: PowerStream Plus Setup 3.00.01.005 Please follow the firmware update instructions Note: This firmware package contains the 1.05.09.001 firmware version for the Maevex 5100 series. |
Added Support for Matrox Maevex 6152 Decoder. What to expect from your hardware and software - please see release notes. Matrox does not support the mix and match of Maevex units of the same series with different firmware versions. All Maevex devices on a Maevex network must use the same version of the firmware package. Your firmware package version must also match the package version of your PowerStream Plus software. Contact Matrox Technical Support for more details. |
| 2020-04-08 |
PowerStream Plus Setup 2.04.00.016Do not forget to also download and install the new firmware: Firmware Package Version 2.04.00.016 Windows 10 (64-bit) Windows 7 (64-bit or 32-bit) Windows Server 2008R2 (64-bit) Windows Server 2016 (64-bit) Windows Server 2019 (64-bit) |
Firmware Package Version 2.04.00.016Do not forget ot also download and install the new software: PowerStream Plus Setup 2.04.00.016 Please follow the firmware update instructions Note: This firmware package contains the 1.05.07.003 firmware version for the Maevex 5100 series. |
Supported operating systems: Windows 10, Windows 7, Windows Server 2008 R2, Windows Server 2016 and Windows Server 2019.
What to expect from your hardware and software - please see release notes. Matrox does not support the mix and match of Maevex units of the same series with different firmware versions. All Maevex devices on a Maevex network must use the same version of the firmware package. Your firmware package version must also match the package version of your PowerStream Plus software. Contact Matrox Technical Support for more details. |
| 2019-10-18 |
PowerStream Plus Setup 2.03.00.322Do not forget to also download and install the new firmware: Firmware Package Version 2.03.00.322 Windows 10 (64-bit) Windows 7 (64-bit or 32-bit) Windows Server 2008R2 (64-bit) Windows Server 2016 (64-bit) Windows Server 2019 (64-bit) |
Firmware Package Version 2.03.00.322Do not forget to also download and install the new software: PowerStream Plus Setup 2.03.00.322 Please follow the firmware update instructions. Note: This firmware package contains the 1.05.07.003 firmware version for the Maevex 5100 series. |
Supported operating systems: Windows 10, Windows 7, Windows Server 2008 R2, Windows Server 2016 and Windows Server 2019.
What to expect from your hardware and software - please see release notes. Matrox does not support the mix and match of Maevex units of the same series with different firmware versions. All Maevex devices on a Maevex network must use the same version of the firmware package. Your firmware package version must also match the package version of your PowerStream Plus software. Contact Matrox Technical Support for more details. |
| 2018-10-03 |
PowerStream Plus Setup 2.02.01.017Do not forget to also download and install the new firmware: Firmware Package Version 2.02.01.017 Windows 10 (64-bit) Windows 7 (64-bit or 32-bit) Windows Server 2008R2 (64-bit) Windows Server 2016 (64-bit) |
Firmware Package Version 2.02.01.017Do not forget to also download and install the new software: PowerStream Plus Setup 2.02.01.017 Please follow the firmware update instructions. |
Added Support for Mavex 6120
Supported operating systems: Windows 10, Windows 7, Windows Server 2008 R2 and Windows Server 2016. What to expect from your hardware and software - please see release notes. Matrox does not support the mix and match of Maevex units of the same series with different firmware versions. All Maevex devices on a Maevex network must use the same version of the firmware package. Your firmware package version must also match the package version of your PowerStream Plus software. Contact Matrox Technical Support for more details. |
| 2018-07-06 |
PowerStream Plus Setup 2.02.00.234Do not forget to also download and install the new firmware: Firmware Package Version 2.02.00.234 Windows 10 (64-bit) Windows 7 (64-bit or 32-bit) Windows Server 2008R2 (64-bit) Windows Server 2016 (64-bit) |
Firmware Package Version 2.02.00.234Do not forget to also download and install the new software: PowerStream Plus Setup 2.02.00.234 Please follow the firmware update instructions. |
Supported operating systems: Windows 10, Windows 7, Windows Server 2008 R2 and Windows Server 2016.
What to expect from your hardware and software - please see release notes. Matrox does not support the mix and match of Maevex units of the same series with different firmware versions. All Maevex devices on a Maevex network must use the same version of the firmware package. Your firmware package version must also match the package version of your PowerStream Plus software. Contact Matrox Technical Support for more details. |
For older PowerStream and Firmware packages, please click here.
To view the Third Party Software packages used by Matrox and License notification, click here.