| Single bus interface |
| Form factor | - Single-slot PCIe x8 Gen3
- Mechanically x16
- Electrically x8 - Low profile, half-length card
|
| IP interface |
| SFP Module | 2 SFP28 cages
-10 GbE IEEE 802.3ae (10GBASE-SR/LR)
-25 GbE IEEE 802.3by (25GBASE-SR/CR/CR-S)
-25 GbE IEEE 802.3cc (25GBASE-LR) |
| ST 2110 Suite | - IP encapsulations according to
- SMPTE ST 2110-10
- SMPTE ST 2110-20
- SMPTE ST 2110-21- Inputs are asynchronous receivers (Type A)
- Outputs are narrow transmitters (Type N)
- - SMPTE ST 2110-22
- SMPTE ST 2110-30
- SMPTE ST 2110-31
- SMPTE ST 2110-40 - Seamless protection (redundancy) according to
- SMPTE ST 2022-7
|
| NMOS | Support JT-NM TR-1001-1 for system environment and device behaviour including:
- NMOS IS-04
- NMOS IS-05
- DHCP, PTP, LLDP, DNS-SD
- System resource |
| Monitor tools | - Telemetry for monitoring and diagnosis of IP endpoints
|
| Video inputs and outputs |
| Video formats | - Each flow is SMPTE ST 2110-20/ ST 2110-22 compliant
- Each SFP28 is paired to offer primary and redundancy flows (SMPTE ST 2022-7)
|
| Video formats | The dual SFP28 in 100 GbE offer: - Primary flows
-HD: 16 inputs and 16 outputs
-1080p60: 8 inputs and 8 outputs
-4Kp60: 2 inputs and 2 outputs - Redundancy flows that mirror the above throughput
|
| Video formats | - Standard broadcast resolutions:
- 1280x720p at 23.98, 24, 25, 29.97, 30, 50, 59.94, and 60 fps
- 1920x1080i at 25, 29.97, 30 fps
- 1920x1080PsF at 23.98, 24, 25, 29.97, 30 fps
- 1920x1080p at 23.98, 24, 25, 29.97, 30, 50, 59.94 and 60 fps
- 2048x1080p at 23.98, 24, 25, 29.97, 30, 50, 59.94 and 60 fps
- 3840x2160p at 23.98, 24, 25, 29.97, 30, 50, 59.94 and 60 fps
- 4096x2160p at 23.98, 24, 25, 29.97, 30, 50, 59.94 and 60 fps - Custom resolutions:
- 512x150p to 8192x4320p at 23.98, 24, 25, 29.97, 30, 50, 59.94 and 60 fps
- Output frame rates support 45, 90, 119.88 and 120 fps
|
| Video formats | - 8- and 10-bit YUV 422
- 8- and 10-bit RGB 4:4:4
- Inputs and outputs can be fill or fill/key where the key can be inverted and expanded
- Inputs allow full line rate capture to memory, allowing any bursty input to be captured
|
| Low latency capture | - Subfield/subframe transfers between I/O and host memory for ultra-low latency in-to-out delay
- Support Asynchronous capture
|
| Audio inputs and outputs |
| Audio formats | - Each flow is SMPTE ST 2110-30/ST 2110-31 compliant conforming with Levels A, B, and C
- Dual SFP28 in 25 GbE offers:
- Primary flows: 32 input and 32 output flows
- Redundancy flows that mirror the above throughput - Each flow can be 1 to 64 tracks with an overall max of 1024 tracks
- Audio flows are independent of video flows
- 48KHz sampling
|
| Ancillary data inputs and outputs |
| Auxiliary data | - Each flow is SMPTE ST 2110-40 compliant
- 32 flows of simultaneous inputs and outputs
- Dual SFP28 in 25 GbE offers:
- Primary flows: 32 input and 32 output flows
- Redundancy flows that mirror the above throughput
|
| On board processing |
| Proxy scaler | • Proxy generation of any I/O buffer
• Provides 1/2, 1/4 or 1/8 decimation
• Simultaneous capture of full resolution and decimated buffers from I/O memory |
| Color space conversions | • YUV/YUVA to ARGB from I/O to host memory
• ARGB to YUV/YUVA from host to I/O memory |
| Genlock time base |
| PTP | • Genlock over IP as per SMPTE ST 2059
• Best master clock algorithm |
