Infrastructure Products
Matrox ConvertIP Series
ConvertIP DRS
Matrox ConvertIP DRS features 12G-SDI, genlock, and three RJ45 ports on a single device. ConvertIP DRS is designed for 1G AV workflows and is optimal for an ultra-low latency experience. The device can receive power over Ethernet through its RJ45 connection, or it can be powered through an optional power supply unit. Both can be used simultaneously to deliver power redundancy.
Key features
- 12G-SDI I/O
- Multi-network support
- 2x RJ45 (1G & 2.5G network support for Media and Control)
- 1x RJ45 (1G network support for independent control network)
- Single device that transmits or receives IP signals
- Standardized Discovery and Routing – based on AMWA NMOS IS-04 and IS-05 specifications
- Fanless design for quiet cooling
- PTP-derived genlock output support
- Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)
- Compact form factor mounts easily to the back of a monitor
- ConvertIP Command Center web interface for managing ConvertIP devices
- Complimentary ConvertIP Manager Windows application for simple commission and deployment
Transport formats
- Uncompressed HD and UHD support per SMPTE ST 2110-20
- Optional JPEG XS codec license for SMPTE ST 2110-22 support (up to 2 Gbps)
- IPMX
- ProAV Colibri codec for high-quality transmission of compressed media (adjustable up to 6 Gbps)
- Glass-to-glass latencies of 1ms achievable in compressed and uncompressed workflows
Optional products
- ConductIP Media Routing Appliance to discover, route, and monitor ST 2110 or IPMX signals
- Bracket for VESA mounting behind monitors
- 1 RU rack shelf that holds two appliances
- Matrox NRG RPSU fault-tolerant, hot-swappable, and rack-mountable power supply
- Crestron Module to expand existing controlled environments
Technical specifications
|
Product |
|
|
Part number |
CIP-DRS2 |
|
Form factor |
|
ConvertIP product line
SDI to IP | Single media/control port | RJ45
SDI to IP | Dual media ports | RJ45 | Independent control port
SDI to IP | Dual media ports SFP | Independent control port RJ45 | Daisy Chain
HDMI to IP | Single media/control port | RJ45
HDMI to IP | Dual media ports SFP | Independent control port RJ45 | Daisy Chain | Pass through capabilities
HDMI to IP | Dual media ports | RJ45 | Independent control port | Pass through capabilities
HDBaseT to IP | Single media/control port | RJ45/SFP
IP SDM | Dual media ports | SFP/RJ45 | Independent control port | Daisy Chain
ConductIP
Your entire media installation at a glance
ConductIP is a standards-based signal routing platform that seamlessly discovers devices and routes signals to/from any NMOS-enabled end points—including ConvertIP—on SMPTE 2110 or IPMX-enabled networks. ConductIP gives you a comprehensive view of all device information on your IP network and where their signals are being routed, while allowing you to intuitively organize devices in your unique setup.
