Infrastructure Products
Matrox ConvertIP Series
ConvertIP SRST
For businesses and organizations outfitted with HDBaseTTM installations, moving to new infrastructure can be complicated and costly. With Matrox ConvertIP SRST, you can now scale existing HDBaseT network infrastructure—by integrating HDBaseT content into and from the IP network—without the additional cost and hassle of upgrading your current equipment or infrastructure. Based on open standards, ConvertIP SRST is compatible with a SMPTE ST 2110/IPMX network.
Key features
- HDBASE-T I/O
- Multi-network support
- 1x SFP28 (10G & 25G network support)
- 1x RJ45 (1G & 2.5G network support)
- Single device that transmits or receives IP signals
- Standardized Discovery and Routing – based on AMWA NMOS IS-04 and IS-05 specifications
- Fanless design for quiet cooling
- Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)
- Compact form factor mounts easily to the back of a monitor
- Web-based user interface for managing ConvertIP devices
- Complimentary ConvertIP Manager Windows application for simple commission and deployment
- HDCP 1.4 and 2.2 support
Transport formats
- IPMX
- ProAV Colibri codec for visually lossless transmission of compressed of media over 1G network
- Optional JPEG XS codec license for SMPTE ST 2110-22 support (up to 2 Gbps)
- Glass-to-glass latencies of 1ms achievable
Optional products
- ConductIP Media Routing Appliance to discover, route, and monitor ST 2110 or IPMX signals
- Bracket for VESA mounting behind monitors
- 1 RU rack shelf that holds two appliances
- Matrox NRG RPSU fault-tolerant, hot-swappable, and rack-mountable power supply
- Crestron Module to expand existing controlled environments
Deliver the ultimate AVoIP experience
A compact Input/Output device, Matrox ConvertIP SRST is designed to both receive or transmit HDBaseT signals in a single, standalone device. Featuring both RJ45 and SFP28 ports on a single device, ConvertIP SRST enables you to leverage your 1 GbE network to transmit full 4K video at 60 fps over IP in near-real time or uncompressed workflows up to 25 GbE—without ripping out and replacing your current HDBaseT equipment.
Fanless design, quiet operation, maximum efficiency
ConvertIP’s fanless design and whisper-quiet operation means that ConvertIP is made for control rooms, operation centers, and other critical environments that require a noise level of 25 dB and less.
Technical specifications
|
Product |
|
|
Part number |
CIP-SRST |
|
Form factor |
|
ConvertIP product line
SDI to IP | Single media/control port | RJ45
SDI to IP | Dual media ports | RJ45 | Independent control port
SDI to IP | Dual media ports SFP | Independent control port RJ45 | Daisy Chain
HDMI to IP | Single media/control port | RJ45
HDMI to IP | Dual media ports SFP | Independent control port RJ45 | Daisy Chain | Pass through capabilities
HDMI to IP | Dual media ports | RJ45 | Independent control port | Pass through capabilities
HDBaseT to IP | Single media/control port | RJ45/SFP
IP SDM | Dual media ports | SFP/RJ45 | Independent control port | Daisy Chain
ConductIP
Your entire media installation at a glance
ConductIP is a standards-based signal routing platform that seamlessly discovers devices and routes signals to/from any NMOS-enabled end points—including ConvertIP—on SMPTE 2110 or IPMX-enabled networks. ConductIP gives you a comprehensive view of all device information on your IP network and where their signals are being routed, while allowing you to intuitively organize devices in your unique setup.
