VERO Technical Specifications

Part Number


Form Factor

Rack-mountable: 1U (horizontal)

Control and Management

Web-based interface compatible with any browser, including mobile devices

REST-based API for easy automation


2x SFP28 cages for ST 2110 interface
      •  10 GbE IEEE 802.3ae (10GBASE-SR/LR)
      •  25 GbE IEEE 802.3by (25GBASE-SR/CR/CR-S)
      • 25 GbE IEEE 802.3cc (25GBASE-LR)

Dedicated RJ-45 management network interface (1GbE)

Supported Media Standards and Specifications

SMPTE ST 2110 (-10, -20, -21, -30, -31* and -40), ST 2022-7, and ST 2059-2

AMWA NMOS IS-04 and IS-05

Signal Generator

According to SMPTE ST 2110-20 and ST 2110-21
      • 3840x2160p @ 50, 59.94 and 60 Hz
      • 1920x1080p @ 23.98, 24, 25, 29.97, 30, 50, 59.94 and 60 Hz
      • 1920x1080i @ 25, 29.97M and 30 Hz
      • 1280x720p @ 50, 59.94 and 60 Hz

ITU-R BT.709 and BT.2020


According to SMPTE ST 2110-30
      • ST 2110-30 Classes A, B & C
      • 1 to 64 channels per flow
      • PCM 24bit @ 48 kHz
      • Packet times of 125 μs or 1ms

Ancillary Data 

According to SMPTE ST2110-40
      • ATC
       AFD and bar data


ST2059-2 compliant

Supported on each SFP for redundancy 

Adjustable Parameters

User presets for SMPTE ST 2110-21 sender types: N (Narrow), NL (Narrow Linear), W (Wide), or custom

Custom packet timing for granular control of number of packets present in the Network Compatibility Model (up to and beyond CMAX) and Virtual Receiver Buffer Model (up to and beyond VRXFULL)

User-controllable RTP timestamp offset per flow

Capture and Analysis
PCAP Recording

Aggregated capture throughput of up to 28Gbps with hardware-based timestamping

Available on both ST 2110 interfaces (primary, redundant or both simultaneously)

Input routing of sources through:
      • Manual settings (IGMP)
      • NMOS IS-05 control
      • SDN control

Auto detection of ST 2110 flows on inputs

EBU Live IP Software Toolkit (LIST©)

Open source ST 2110 analysis toolkit

Deep packet inspection for ST 2110 specification compliance

Pre-installed for convenience

Product Dimensions

22.73 (D) x 18.97 (W) x 1.68 (H) inches
57.75 (D)  x 48.2 (W) x 4.28 (H) cm

Unit Weight

27.38 lbs / 12.42 kg

Power Supply Unit

AC Line voltage: 100-240 V a.c.

AC Frequency: 50-60 Hz

AC Input current (low/high): 3.7 A/ 7.4 A

Wattage: 550 W 

Hardware & Software
Hardware Included

Matrox Vero appliance with ST 2110 signal generator, PCAP capture, and stream analysis.

Includes racking kit and power cords (US, EUR, UK)

Operating Conditions

Temperature: 10 to 35 degrees Celsius

Humidity: 20% to 80% non-condensing


Two-year limited warranty


Learn more about VERO

Request a Demo