Infrastructure Products
Matrox ConvertIP Series
ConvertIP SDM - Coming Soon!
Matrox ConvertIP SDM is an Intel® smart display module that supports ST 2110 and IPMX inputs. Featuring two RJ45 and two SFP28 ports on a single device, ConvertIP SDM is designed for compressed or uncompressed workflows up to 25G and is optimal for zero latency applications. The device’s all-in-one design fits into displays and projectors, making it ideal for users that require the convenience and reliability of an integrated display solution.
Key features
- Multi-network support
- 2x SFP28 (10G & 25G network support for media and control)
- 2 x RJ45 (1/2.5G network support for media and control transport)
- 1 x RJ45 (1G network support for independent control network)
- Daisy Chain feature enables the reception and output of multiple streams from a single network port
- Ensure uninterrupted operation in case of network problems with support of ST 2022-7 redundancy
- Standardized Discovery and Routing – based on AMWA NMOS IS-04 and IS-05 specifications
- ConvertIP Command Center web interface for managing ConvertIP devices
- Complimentary ConvertIP Manager Windows application for simple commission and deployment
- Quiet operation
- HDCP 1.4 and 2.2 support
Transport formats
- Uncompressed HD and UHD support per SMPTE ST 2110-20 and IPMX
- Optional JPEG XS codec license for SMPTE ST 2110-22/IPMX support (up to 2 Gbps)
- ProAV Colibri codec for high-quality transmission of compressed media (adjustable up to 6 Gbps)
- Glass-to-glass latencies of 1ms achievable in compressed and uncompressed workflows
Flexible ST 2110 and IPMX monitoring and multi-display with ConvertIP Daisy Chain
Boost your monitoring capacity and lower your total cost of ownership by driving multiple displays using a single network port on your switch with Daisy Chain.
- Send multiple streams from a single SFP network port to daisy-chained ConvertIP units. Ideal to minimize the number of SFP links to switch.
- Create monitor walls with 2, 8, or even 16 displays, each outputting unique content using a single fiber cable.
- Support multiple uncompressed or compressed streams on 10G or 25G links.
- Reduce port usage, SFP, and fiber requirements driving down total cost of ownership.
- Ensure uninterrupted operation in case of network problems and localize impact in case of a single device failure with support of ST 2022-7 redundancy.
*Feature available on ConvertIP SDM, DSH, and DSS models.
Optional products
ConductIP Media Routing Appliance to discover, route, and monitor ST 2110 or IPMX signals
Technical specifications
ConvertIP product line
SDI to IP | Single media/control port | RJ45
SDI to IP | Dual media ports | RJ45 | Independent control port
SDI to IP | Dual media ports SFP | Independent control port RJ45 | Daisy Chain
HDMI to IP | Single media/control port | RJ45
HDMI to IP | Dual media ports SFP | Independent control port RJ45 | Daisy Chain | Pass through capabilities
HDMI to IP | Dual media ports | RJ45 | Independent control port | Pass through capabilities
HDBaseT to IP | Single media/control port | RJ45/SFP
IP SDM | Dual media ports | SFP/RJ45 | Independent control port | Daisy Chain
ConductIP
Your entire media installation at a glance
ConductIP is a standards-based signal routing platform that seamlessly discovers devices and routes signals to/from any NMOS-enabled end points—including ConvertIP—on SMPTE 2110 or IPMX-enabled networks. ConductIP gives you a comprehensive view of all device information on your IP network and where their signals are being routed, while allowing you to intuitively organize devices in your unique setup.
