Matrox ConvertIP Series
Matrox ConvertIP is a series of ST 2110/IPMX baseband converters and encoders/decoders. ConvertIP converts SMPTE 2110 and IPMX IP signals to and from HDMI, HDBaseT™, or SDI, and can be configured to support uncompressed and compressed AV over IP signals. Built for diverse applications, each ConvertIP device can be configured as either a transmitter or receiver that can display, monitor, and transmit 4K signals over 1G to 25G networks with zero latency. The IP converters support copper and fiber networks, as well as multiple codecs—such as ProAV Colibri and JPEG-XS—for visually lossless compressed and lossless uncompressed video transmission. The complimentary ConvertIP Manager software simplifies multi-unit installation, updates, routing and more.
Why ConvertIP?
- Each device can be configured to support uncompressed and compressed
- Each appliance can be configured as a transmitter or receiver
- IPMX, SMPTE ST 2110, and NMOS aware
- RGB to/from YUV, up/down scaling, and frame rate conversion offered to enable multi-format workflows
- Daisy Chain feature enables the reception and output of multiple streams from a single network port
- Flexible media network connectivity (support for 10/25G SFPs)
- Network redundancy per SMPTE ST 2022-7
- Zero latency with lossless 4K image quality
- Convenient web-based user interface for configuring ConvertIP devices and complimentary Manager software for multi-unit management
- TAA compliant SKUs available
Which ConvertIP product is right for you?
Maximum input/output flexibility built into each IP to HDMI, SDI, or HDBaseT device means you can support a variety of installations and future-proof your investment.
SDI to IP | Single media/control port | RJ45
SDI to IP | Dual media ports | RJ45 | Independent control port
SDI to IP | Dual media ports SFP | Independent control port RJ45 | Daisy Chain
HDMI to IP | Single media/control port | RJ45
HDMI to IP | Dual media ports SFP | Independent control port RJ45 | Daisy Chain | Pass through capabilities
HDMI to IP | Dual media ports | RJ45 | Independent control port | Pass through capabilities
HDBaseT to IP | Single media/control port | RJ45/SFP
IP SDM | Dual media ports | SFP/RJ45 | Independent control port | Daisy Chain
Your entire media installation at a glance
ConductIP is a standards-based signal routing platform that seamlessly discovers devices and routes signals to/from any NMOS-enabled end points—including ConvertIP—on SMPTE 2110 or IPMX-enabled networks. ConductIP gives you a comprehensive view of all device information on your IP network and where their signals are being routed, while allowing you to intuitively organize devices in your unique setup.
Applications
Broadcast
Live Event Production
Corporate AV
Find out how ConvertIP helped the Fuse stage one of the biggest immersive live events Las Vegas has ever seen—all in ST 2110.
Questions about ConvertIP?