Infrastructure Products
Matrox ConvertIP Series
ConvertIP SRS
Matrox ConvertIP SRS is a compact, standalone ST 2110 and IPMX transmitter/receiver device. Delivering up to 4K60 image quality and featuring one RJ45 port, ConvertIP SRS is designed for both 1G and 2.5G AV workflows and is optimal for an ultra-low latency experience. ConvertIP SRS supports Power over Ethernet through its RJ45 connection, and power redundancy through an optional power supply unit.
Key features
- 12G-SDI I/O
- 1G and 2.5G support over RJ45
- Single device that transmits or receives IP signals
- Standardized Discovery and Routing – based on AMWA NMOS IS-04 and IS-05 specifications
- Fanless design for quiet cooling
- Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)
- Compact form factor mounts easily to the back of a monitor
- Web-based user interface for managing ConvertIP devices
- Complimentary ConvertIP Manager Windows application for simple commission and deployment
Transport formats
- IPMX
- ProAV Colibri codec for visually lossless transmission of compressed of media over 1G network
- Optional JPEG XS codec license for SMPTE ST 2110-22 support (up to 2 Gbps)
- Glass-to-glass latencies of 1ms achievable
Optional products
- ConductIP Media Routing Appliance to discover, route, and monitor ST 2110 or IPMX signals
- Bracket for VESA mounting behind monitors
- 1 RU rack shelf that holds three appliances
- Matrox NRG RPSU fault-tolerant, hot-swappable, and rack-mountable power supply
- Crestron Module to expand existing controlled environments
Technical specifications
|
Product |
|
|
Part number |
CIP-SRS |
|
Form factor |
|
Related products
SDI to IP | Single media/control port | RJ45
SDI to IP | Dual media ports | RJ45 | Independent control port
SDI to IP | Dual media ports SFP | Independent control port RJ45 | Daisy Chain
HDMI to IP | Single media/control port | RJ45
HDMI to IP | Dual media ports SFP | Independent control port RJ45 | Daisy Chain | Pass through capabilities
HDMI to IP | Dual media ports | RJ45 | Independent control port | Pass through capabilities
HDBaseT to IP | Single media/control port | RJ45/SFP
IP SDM | Dual media ports | SFP/RJ45 | Independent control port | Daisy Chain
ConductIP
Your entire media installation at a glance
ConductIP is a standards-based signal routing platform that seamlessly discovers devices and routes signals to/from any NMOS-enabled end points—including ConvertIP—on SMPTE 2110 or IPMX-enabled networks. ConductIP gives you a comprehensive view of all device information on your IP network and where their signals are being routed, while allowing you to intuitively organize devices in your unique setup.
